A Step-by-Step Guide on How to Change a Spare Tyre
A Step-by-Step Guide on How to Change a Spare Tyre

A Step-by-Step Guide on How to Change a Spare Tyre

February 13, 2024

Getting a flat tyre can be a frustrating experience, but knowing how to change a spare tyre can save you time and money. In this step-by-step guide, we will walk you through the process of changing a spare tyre, so you can get back on the road quickly and safely.

Step 1: Find a Safe Location

The first step is to find a safe location to change your tyre. Pull over to the side of the road, away from traffic, and engage your hazard lights. Make sure you are on a flat surface and away from any slopes or inclines.

Step 2: Gather the Necessary Tools

Before you start changing your tyre, gather the necessary tools. These typically include a spare tyre, a jack, a lug wrench, and a wheel chock or brick to secure the vehicle.

Step 3: Loosen the Lug Nuts

Using the lug wrench, loosen the lug nuts on the flat tyre. Do not remove them completely at this stage, just loosen them enough to make it easier to remove later.

Step 4: Position the Jack

Locate the designated jacking point under your vehicle, usually indicated by an arrow or a notch. Place the jack in the correct position and start raising the vehicle until the flat tyre is off the ground.

Step 5: Remove the Flat Tyre

Once the vehicle is raised, remove the lug nuts completely and carefully pull the flat tyre off the wheel hub. Place it aside, away from the work area.

Step 6: Mount the Spare Tyre

Take the spare tyre and align it with the wheel hub. Push it onto the hub until it fits snugly. Then, hand-tighten the lug nuts onto the wheel studs.

Step 7: Lower the Vehicle

Using the jack, carefully lower the vehicle back to the ground. Once the vehicle is on the ground, use the lug wrench to fully tighten the lug nuts. Be sure to tighten them in a star or crisscross pattern to ensure even tightening.

Step 8: Double Check the Lug Nuts

After tightening the lug nuts, double-check each one to ensure they are secure. It is essential to verify that all lug nuts are tightened properly to prevent any accidents or tyre wobbling.

Step 9: Put Away the Tools and Flat Tyre

Now that you have successfully changed your spare tyre, it’s time to put away the tools and the flat tyre. Make sure to store them securely in your vehicle, as you may need them in the future.

Step 10: Get Your Flat Tyre Repaired or Replaced

Remember, a spare tyre is only a temporary solution. It’s essential to get your flat tyre repaired or replaced as soon as possible. Visit a tyre shop or a mechanic to have it professionally inspected and fixed.

By following these step-by-step instructions, you can confidently change a spare tyre whenever the need arises. Remember to prioritize your safety and take your time throughout the process. If you are unsure or uncomfortable, it’s always best to seek professional assistance.

Safe travels!

Recent Posts

Award-winning, car marketplace of new and pre-owned vehicles with several locations across the country.
Copyright © 2023. All rights reserved.
Find a car
sell a car
Apply financing
Get insurance
Enable Notifications OK No thanks