Introduction
Knowing how to change a car tyre is an essential skill for every driver. Whether you encounter a flat tyre during a road trip or simply need to replace an old one, being able to do it yourself can save you time and money. In this guide, we will walk you through the step-by-step process of changing a car tyre.
Step 1: Find a Safe Location
Pull over to a safe spot away from oncoming traffic. Ensure the car is on a flat surface and engage the parking brake.
Step 2: Gather the Necessary Tools
You will need a spare tyre, a jack, a lug wrench, and a wheel chock. These tools should be readily available in your car’s trunk.
Step 3: Loosen the Lug Nuts
Using the lug wrench, loosen the lug nuts on the flat tyre. Do not remove them completely at this stage.
Step 4: Lift the Vehicle
Position the jack under the car according to the manufacturer’s instructions and lift the vehicle until the flat tyre is off the ground.
Step 5: Remove the Flat Tyre
Completely remove the lug nuts and carefully take off the flat tyre. Place it aside, away from the work area.
Step 6: Install the Spare Tyre
Align the spare tyre with the wheel bolts and push it onto the hub. Hand-tighten the lug nuts to secure the spare tyre in place.
Step 7: Lower the Vehicle and Tighten the Lug Nuts
Use the jack to lower the vehicle back to the ground. Once the car is stable, use the lug wrench to tighten the lug nuts in a star pattern.
Step 8: Check the Tyre Pressure
Ensure the spare tyre is properly inflated by using a tyre pressure gauge. Adjust the pressure if necessary.
Conclusion
Changing a car tyre is a straightforward process that any driver can learn. However, if you prefer professional assistance, consider partnering with a trusted auto centre like Vin’s Auto Centre. With their commitment to providing quality tyres and car parts, they can ensure your vehicle is in top condition.
Related